SILENT KNIGHT 5084 Instalační manuál stáhnout pdf (Strana 27)

Series 5000 Entry System Installation/Operation Manual

3-16 151174

3.5.8 Installing DC Doorstrike

1. Install the electric doorstrike in the door frame according to the manufacturer’s specifica-

tions.

Figure 3-10 DC Doorstrike Wiring Diagram

2. For a DC power doorstrike place a jumper wire between terminals 5 and 12 (see Figure

3-10).

3. Connect the doorstrike to terminals 4 and 11 (see Figure 3-10).

Note: Only ONE doorstrike per system can be installed this way. Any additional doorstrikes must be AC-driven

or powered by a separate power supply.

4. Install a reverse bias diode (1N5401 supplied with the 5083 and 5084 panels) across the

DC doorstrike coil to suppress arcing and electrical noise. (See Figure 3-10.)

Caution:

The maximum allowable current to operate a DC doorstrike is 1A. Damage to the power supply

and to the battery charging circuit will occur if this is exceeded.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 57 58

Žádné komentáře

SILENT KNIGHT 5084 Instalační manuál Strana 27